شرکت پترو آپادانا : تولید کننده افزودنی های بتن و مواد شیمیایی ساختمان، فوم  شیمیایی بتن و فوم حفاری

تلفن تماس : 07132605115

A two-component mixture based on organic polymers and with the use of chemical additives, its adhesion capability has been strengthened and it is used for planting or overlapping rebars in the walls and roofs of concrete structures.

Properties and effects:

Excellent adhesion to concrete and steel
Longer life than concrete
Possibility of planting reinforcement in lightweight concrete
Wanker bolt armature protection against corrosion and discoloration
Easy to use and speed up execution
Application:

Planting and fixing rebars in all types of reinforcement, anchor bolts, metal rods, etc.
Under the plate columns
Creates excellent adhesion between metal and concrete surfaces
Dosage:

Depending on the specific gravity of the planting paste, the volume of the number of holes and the type of rebar, the amount of consumption is different. We calculate the volume of the rebar and subtract the volume of the hole. The amount of material required can be calculated according to the remaining volume and specific gravity.

Rebar diameter (mm) 8 10 12 16 18 20 25
Hole diameter (mm) 12 14 16 20 22 24 29
Hole operation (mm) 13 15 17 21 23 25 30
Technical Specifications:

Appearance of component A: dough Component B: dough
Final strength 7 days
Initial setting time 6 to 9 hours
Specific gravity 0.02 9 1.9 g / cm3
Maximum run time after mixing run: 20 minutes

Method of Use:

First, the planting surface of the rebars and the relevant cavity should be dry and free from any kind of contamination such as dust, grease, paint and should not have any loose elements. First, pour the planting paste ingredients into a container and mix thoroughly using an electric mixer. Pour the prepared mixture into the piston of the injection tool, put the plastic cap at the end of the piston, cut the tip of the nozzle and inject the rebar implant into the hole. To prevent the loss of planting material, you should fill about half of the end of the hole. Then insert the reinforcement into the hole and by turning the reinforcement inside the hole, make sure that the surfaces of the hole are in full contact with the rebar planting paste.

Note 1: After finishing the operation, all tools and equipment must be washed quickly with solvent.

Shelf life: one year in the original packaging

Storage conditions: Container in a package away from moisture, frost and direct sunlight

Best storage temperature: +10 to +30 ° C

Packing type: 5 kg set